|
|
Control unit for automatic laboratory manipulation system
Vávra, Tomáš ; Růžek, Václav (referee) ; Dřínovský, Jiří (advisor)
This document deals with devices which are used for the automatic Gram staining. The document starts by a research with the aim to discover existing devices and to compare them to the concept of the device developed by company Biovendor. There is theoretically and then practically dealed with the methods of the rotor imbalance detection and measurement of water-level. The Practical part of this document describes the development of the control unit with the microcontroller ARM Cortex-M3 which will be used for the prototype development of Biovendor’s device. The Last part describes measurement of imbalance of three different rotors with the aid of the control unit.
|
|
|
Design of Laboratory Centrifuge for Sample Separation
Kašná, Marie ; Rubínová, Dana (referee) ; Fridrichová, Eva (advisor)
The project deals with the design of laboratory centrifuges with regard to aesthetic, ergonomic and technical parameters. Emphasis was placed on stability, ease of use and further possibilities for use. The project also includes an analysis of the current market. The resulting device design can be widely used, but is most suitable for small laboratories.
|
|
|
Dependence of Sludge Thermal Pre-treatment on its Dewatering
Žerava, Zdeněk ; Houdková, Lucie (referee) ; Boráň, Jaroslav (advisor)
The first part of the thesis is focused on the problems related to sludge and evaluates sludge disposal from waste treatment plants. The thesis mentions factors influencing method selection of sludge disposal as well as it compares sludge disposal in the Czech Republic and in the other states of the EU. It describes a complete waste treatment line and sludge disposal in the area of sludge treatment and disposal. It deals with sludge disintegration and describes the most effective methods of disintegration. The second part of the thesis describes an experimental part of disintegration of waste treatment sludge. An experiment was conducted in the school laboratory in a way of thermal disintegration in the double-surface pressure tank. The disintegration was conducted to temperatures of 60 °C, 90 °C, 120 °C, 150 °C, and 180 °C. We monitored dependence of the sludge dry residue content on disintegration temperature as well as content of suspended solids in liquid fraction (FUGAT). It was possible to choose optimal temperature of disintegration in accordance with processed results.
|
|
|
Design of Laboratory Centrifuge for Sample Separation
Kašná, Marie ; Rubínová, Dana (referee) ; Fridrichová, Eva (advisor)
The project deals with the design of laboratory centrifuges with regard to aesthetic, ergonomic and technical parameters. Emphasis was placed on stability, ease of use and further possibilities for use. The project also includes an analysis of the current market. The resulting device design can be widely used, but is most suitable for small laboratories.
|
|
|
Dependence of Sludge Thermal Pre-treatment on its Dewatering
Žerava, Zdeněk ; Houdková, Lucie (referee) ; Boráň, Jaroslav (advisor)
The first part of the thesis is focused on the problems related to sludge and evaluates sludge disposal from waste treatment plants. The thesis mentions factors influencing method selection of sludge disposal as well as it compares sludge disposal in the Czech Republic and in the other states of the EU. It describes a complete waste treatment line and sludge disposal in the area of sludge treatment and disposal. It deals with sludge disintegration and describes the most effective methods of disintegration. The second part of the thesis describes an experimental part of disintegration of waste treatment sludge. An experiment was conducted in the school laboratory in a way of thermal disintegration in the double-surface pressure tank. The disintegration was conducted to temperatures of 60 °C, 90 °C, 120 °C, 150 °C, and 180 °C. We monitored dependence of the sludge dry residue content on disintegration temperature as well as content of suspended solids in liquid fraction (FUGAT). It was possible to choose optimal temperature of disintegration in accordance with processed results.
|
|
|
Dependence of Sludge Thermal Pre-treatment on its Dewatering
Žerava, Zdeněk ; Houdková, Lucie (referee) ; Boráň, Jaroslav (advisor)
The first part of the thesis is focused on the problems related to sludge and evaluates sludge disposal from waste treatment plants. The thesis mentions factors influencing method selection of sludge disposal as well as it compares sludge disposal in the Czech Republic and in the other states of the EU. It describes a complete waste treatment line and sludge disposal in the area of sludge treatment and disposal. It deals with sludge disintegration and describes the most effective methods of disintegration. The second part of the thesis describes an experimental part of disintegration of waste treatment sludge. An experiment was conducted in the school laboratory in a way of thermal disintegration in the double-surface pressure tank. The disintegration was conducted to temperatures of 60 °C, 90 °C, 120 °C, 150 °C, and 180 °C. We monitored dependence of the sludge dry residue content on disintegration temperature as well as content of suspended solids in liquid fraction (FUGAT). It was possible to choose optimal temperature of disintegration in accordance with processed results.
|
|
|
Control unit for automatic laboratory manipulation system
Vávra, Tomáš ; Růžek, Václav (referee) ; Dřínovský, Jiří (advisor)
This document deals with devices which are used for the automatic Gram staining. The document starts by a research with the aim to discover existing devices and to compare them to the concept of the device developed by company Biovendor. There is theoretically and then practically dealed with the methods of the rotor imbalance detection and measurement of water-level. The Practical part of this document describes the development of the control unit with the microcontroller ARM Cortex-M3 which will be used for the prototype development of Biovendor’s device. The Last part describes measurement of imbalance of three different rotors with the aid of the control unit.
|
guest ::
